Fujifilm Warning Turn Off the Camera and Turn on Again
The post-obit warnings are displayed in the LCD monitor:
| Alarm | Description |
|---|---|
(red) | Low battery. Charge the bombardment or insert a fully-charged spare battery. |
(blinks red) | Battery exhausted. Charge the battery or insert a fully-charged spare battery. |
(displayed in red with ruddy focus frame) | The photographic camera can not focus. Use focus lock to focus on another subject at the same altitude, then recompose the moving picture |
| Aperture or shutter speed displayed in red | The subject is too bright or too dark and the picture will be over- or under-exposed. Use the flash for additional lighting when taking photographs of poorly-lit subjects. |
| Camera malfunction. Turn the camera off and so on again. If the message persists, contact a FUJIFILM dealer. | |
| Turn the camera off, remove the lens, and make clean the mounting surfaces, then supervene upon the lens and plough the camera on. If the trouble persists, contact a FUJIFILM dealer. | |
| The retentivity carte is incorrectly formatted. Apply the camera to format the card. | |
| |
| The retentivity card is locked. Unlock the card. | |
| |
| The retentivity bill of fare is full and pictures tin can not exist recorded. Delete pictures or insert a memory carte du jour with more free space. | |
| The shutter can only be released when a retention carte du jour is inserted. Insert a memory menu. | |
| |
| |
| The camera has run out of frame numbers (current frame number is 999–9999). Format the memory card and select RENEW for FRAME NO.. Take a picture to reset frame numbering to 100–0001, and then select CONTINUOUS for FRAME NO.. | |
| |
| An attempt was made to delete or rotate to a protected motion-picture show. Remove protection and endeavor once more. | |
| The picture is damaged or was not created with the photographic camera. | |
| Red-eye removal can not exist applied to the selected picture. | |
| Reddish-centre removal can non be applied to movies. | |
| An attempt was fabricated to rotate a picture show that tin can not be rotated. | |
| Movies tin not be rotated. | |
| The DPOF impress social club on the current retentivity card contains more than 999 images. Re-create the pictures to a computer and create a new impress order. | |
| The picture can not be printed using DPOF. | |
| Movies can not be printed using DPOF. | |
| A connectedness error occurred while pictures were beingness printed or copied to a estimator or other device. Ostend that the device is turned on and that the USB cable is connected. | |
| Printer out of newspaper or ink, or other printer fault. Cheque printer (see printer manual for details). To resume press, turn the printer off and then plow information technology back on. | |
| Printer out of paper or ink, or other printer mistake. Check printer (see printer transmission for details). If printing does not resume automatically, press MENU/OK to resume. | |
| An effort was made to print a movie, a picture not created with the photographic camera, or a picture in a format non supported by the printer. Movies and some pictures created with other devices tin can non be printed; if the picture is a still picture created with the camera, check the printer manual to confirm that the printer supports the JFIF–JPEG or Exif–JPEG format. If information technology does not, the pictures tin not exist printed. | |
| Turn the camera off and expect for it to cool. Mottling may increase in pictures taken when this warning is displayed. |
Source: https://fujifilm-dsc.com/en/manual/x-t10/appendix/warning_messages/index.html
.
Memory Full
CANNOT EXECUTE
CANNOT EXECUTE
0 Response to "Fujifilm Warning Turn Off the Camera and Turn on Again"
Postar um comentário